IPM - H3O Magic Stick In Noble Golden – Limited Edition

Basic operation

 

1.  How to use

Step 1: Take the Magic Stick from the protective case;

Step 2: Fill a glass with about 200ml of water. For higher efficiency, immerse the product’s high-efficiency decomposition stick portion in the water;

Step 3: Place the Energy Stick in the glass. For best result, water level should be above the top of the high-efficiency decomposition stick;

Step 4: Press the power button of the energy stick and hold for 2 seconds. Illumination of the LED indicator means commencement of the production of hydrogen ion water;

Step 5: The indicator will be off after 3 minutes when production of hydrogen ion water is completed;

Hints: Drink the produced hydrogen ion water within 3 minutes.

Water to be used:

l Use purified water or mineral water for production of energy water. Production with mineral water of different brands yields differences in the energy water produced because they contain minerals of different quality.

 

2. How to recharge

A.      To recharge with a charge stand: Insert the energy stick into its place in the charge stand. The indicator flashes when the recharging begins. When the recharging is completed, the 3 indicators remain lit on to show that the energy stick has been fully recharged;

B.      To recharge with direct connection of a micro USB recharger cable: Insert the micro USB recharger cable in the USB portal of the energy stick. The indicator flashes when the recharging begins. When the recharging is completed, the 3 indicators remain lit on to show that the energy stick has been fully recharged.

A full recharge takes 3 hours. Battery level will fall with use. Upon the 30th use and above, the indicator will remain flashing. This means low level of battery and timely recharging is needed.